Specifications Installation
Manual
Sales Brochure
Total system flexibility using multiple compressor models
and applications on a common chassis.
Standard
Features:
• Total system flexibility using multiple compressor models
and applications on a common chassis.
• Up
to Four fan section cabinet choices of either Hermetic, Scroll
or Semi-Hermetic multiple compressors with maximum
3 compressors per fan section.
• Compressor
sizes available ranging from 1/2 through 6 HP, to a maximum total
of 6HP per fan section and 24 HP per unit. (Based
on 95 °F (35 °C) design Ambient).
• Semi-hermetic
(2 HP and larger) use suction and discharge vibration eliminators
and spring mounts.
• High
efficiency enhanced tube on both indoor or outdoor condenser design
using high efficiency PSC fan motors.
• Outdoor unit uses weather-resistant housing with hinged hood,
weatherproof electrical panel and fixed head pressure flooding
valve.
• Each compressor
includes main power fuse block, contactor, adjustable Dual (low
/high) pressure control, oil pressure control (where
applicable) and fused control circuit.
• Single Point
Main electrical panel with defrost timeclock and contactor
options available for air and electric defrost evaporators.(single
point dependant on evaporator voltage).
• Includes liquid
line drier and sightglass.
Optional
Components (Factory Mounted)
• Sealed Suction
Filter
• Suction accumulator*
• Discharge
line check valve
• Receiver Inlet ball valve
• Heated and insulated receiver
• Flex hoses -for pressure controls
• Field piping connections at rear (instead at front)
• Main disconnect switch
• Main disconnect fusing
• Voltage /Phase monitor
• Compressor circuit breaker
• Compressor anti short cycle time delay relay
• Current sensing relay -for use with Oil control (where applicable)
• Sentronic Oil pressure control (where applicable)
• OMB Oil level Control (where applicable)
• Air or Electric Defrost Kit
• Pumpdown toggle switch
• Liquid Line solenoid valve-with standard 230V coil (shipped loose)
• Spare condenser circuit for remote ice machine
* for
semi-hermetic compressors - maximum one suction accumulator
per fan section. |